Problem with navaids points in the flight plan

Any problem or bug related to 124thATC
Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Problem with navaids points in the flight plan

Post by Bulva » Fri Apr 12, 2019 3:21 am

(sorry for my English)
I have a problem with creating a flight plan in 124thATC. Problem with navaids points in the flight plan.
I create it first in GSM530 (for example: EPWA KRN LOZ EPLL) and everything is OK.
Then I import this plan into the planner in 124thATC or manually enter KRN LOZ into the flight plan bar.
And then after the approval of the plan a problem arises.
The program as KRN (Karnica) point (which is normally near EPWA airport) is set by another KRN (from distant Ukraine - Kirensk).
The same applies to, for example, the LIN point (Linin) (which is also close to the EPWA airport), and the program loads a very distant LIN point (Linate Milan) into the plan.
What to do to make 124thATC differentiate between different points with the same names (LIN, KRN, ...., etc). ?????

greetings

ntnll
Posts: 358
Joined: Sun May 13, 2018 12:32 pm

Re: Problem with navaids points in the flight plan

Post by ntnll » Fri Apr 12, 2019 11:32 am

Bulva wrote:
Fri Apr 12, 2019 3:21 am
(sorry for my English)
I have a problem with creating a flight plan in 124thATC. Problem with navaids points in the flight plan.
I create it first in GSM530 (for example: EPWA KRN LOZ EPLL) and everything is OK.
Then I import this plan into the planner in 124thATC or manually enter KRN LOZ into the flight plan bar.
And then after the approval of the plan a problem arises.
The program as KRN (Karnica) point (which is normally near EPWA airport) is set by another KRN (from distant Ukraine - Kirensk).
The same applies to, for example, the LIN point (Linin) (which is also close to the EPWA airport), and the program loads a very distant LIN point (Linate Milan) into the plan.
What to do to make 124thATC differentiate between different points with the same names (LIN, KRN, ...., etc). ?????

greetings
Hi Bulva welcome in the forum,
let's start here Read BEFORE Post !!!
124thATC Developer

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Sat Apr 13, 2019 12:17 am

Welcome once again.
I hope that this error file was about. :?
bugReport.7z
Best wishes :-)
You do not have the required permissions to view the files attached to this post.

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Sun Apr 14, 2019 4:41 pm

Any ideas ???
:?

RandomUser
Posts: 59
Joined: Fri Aug 31, 2018 10:15 pm

Re: Problem with navaids points in the flight plan

Post by RandomUser » Mon Apr 15, 2019 10:33 pm

Patience. Antonello does have a life outside 124th & X-Plane.

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Tue Apr 16, 2019 12:13 am

Sorry, :oops:

ntnll
Posts: 358
Joined: Sun May 13, 2018 12:32 pm

Re: Problem with navaids points in the flight plan

Post by ntnll » Tue Apr 16, 2019 10:01 am

RandomUser wrote:
Mon Apr 15, 2019 10:33 pm
Patience. Antonello does have a life outside 124th & X-Plane.
so true, as said this is a free project and the resources limited. I spend hours of my precious life for this! :)
Bulva wrote:
Tue Apr 16, 2019 12:13 am
Sorry, :oops:
At a first glance, looking bug report .kml files with google earth, I see the issue on KRN. This issue should be addressed in the last .60 RC preview, feel free to test it and see if the problem is solved (remember this versions are still under development and unstable)

a.
124thATC Developer

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Tue Apr 16, 2019 9:55 pm

Thank you for your response.
I installed the latest version, but the problem is still there.
After entering the KRN (or LIN) into flight plan, KRN (from Ukraine) and LIN (from Italy) points appear.
I have a request, could anyone check it (set on EPWA and enter the KRN or LIN into flight plan), because maybe I am doing something wrong.

The fragment of the file FlightPlan.kml :
....
<Placemark><name>WAR</name><styleUrl>#msn_ylw-pushpin</styleUrl><Point><coordinates>20.6572,52.2593</coordinates></Point></Placemark>
<Placemark><name>KRN</name><styleUrl>#msn_ylw-pushpin</styleUrl><Point><coordinates>108.067,57.7719</coordinates></Point></Placemark>
<Placemark><name>LOZ</name><styleUrl>#msn_ylw-pushpin</styleUrl><Point><coordinates>19.6248,51.7761</coordinates></Point></Placemark>
....

ntnll
Posts: 358
Joined: Sun May 13, 2018 12:32 pm

Re: Problem with navaids points in the flight plan

Post by ntnll » Wed Apr 17, 2019 9:24 am

Bulva wrote:
Tue Apr 16, 2019 9:55 pm
maybe I am doing something wrong.
I'm more prone to believe that's a bug of the plugin, not sure because you're not providing the log for the last flight you made with the .60 version. I need to test the flight, I'll try later when I'll back home.
The bug is basically caused to a well know XP SDK limitation.
124thATC Developer

ntnll
Posts: 358
Joined: Sun May 13, 2018 12:32 pm

Re: Problem with navaids points in the flight plan

Post by ntnll » Wed Apr 17, 2019 9:24 am

Bulva wrote:
Tue Apr 16, 2019 9:55 pm
maybe I am doing something wrong.
I'm more prone to believe that's a bug of the plugin, not sure because you're not providing the log for the last flight you made with the .60 version. I need to test the flight, I'll try later when I'll back home.
The bug is basically caused to a well know XP SDK limitation.
124thATC Developer

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Wed Apr 17, 2019 2:45 pm

bugReport.7z
You do not have the required permissions to view the files attached to this post.

ntnll
Posts: 358
Joined: Sun May 13, 2018 12:32 pm

Re: Problem with navaids points in the flight plan

Post by ntnll » Wed Apr 17, 2019 5:24 pm

Bulva wrote:
Wed Apr 17, 2019 2:45 pm
bugReport.7z
I need to correct myself, this doesn't look a plugin bug. In fact I can't validate LOZ as a valid VOR/NDB in the zone you're flying. Where did you got this flight plan, where LOZ came from?
124thATC Developer

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Wed Apr 17, 2019 6:11 pm

Thank you very much for trying to help.
I enter the plan manually (or use Little Navmap).
LOZ is a Navaid type: VORDME (Wiaczyn Dolny fr .: 116.10)(near EPLL) and the 124thATC program has no problems with it. I can also remove it from the flight plan and it does not change anything.
The problems are KRN and LIN points, which are correctly located in GNS530, and 124thATC interprets them as other distant points.

Bulva
Posts: 21
Joined: Fri Apr 12, 2019 3:18 am

Re: Problem with navaids points in the flight plan

Post by Bulva » Wed Apr 17, 2019 6:17 pm

Maybe I'm installing 124thATC wrong.
What should I put in the navdata subdirectory ???
I tried different settings but no effect.

ntnll
Posts: 358
Joined: Sun May 13, 2018 12:32 pm

Re: Problem with navaids points in the flight plan

Post by ntnll » Wed Apr 17, 2019 6:29 pm

Bulva wrote:
Wed Apr 17, 2019 6:17 pm
Maybe I'm installing 124thATC wrong.
What should I put in the navdata subdirectory ???
I tried different settings but no effect.
the problem is not your installation, is your flight plan.

rfinder for example suggests a completely different one:

EPWA SOXER EPLL
Last edited by ntnll on Wed Apr 17, 2019 9:52 pm, edited 1 time in total.
124thATC Developer

Post Reply